This new performance series helmet headset from J&M has been designed to be installed into most open face, flip-front and full-coverage style helmets. It features our AeroMike® III miniature boom microphone, two of our wide-fidelity ultra-slim helmet speakers in stereo, our universal clamp-on mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our AeroMike® III microphone along with the fidelity and dependability of our new ultra-slim helmet speakers.

This headset can be connected to any factory installed motorcycle audio system, now and in the foreseeable future, just by interchanging the lower-section hook-up cord. Note: Required lower cord sold separately.

Average rating of (35 reviews)

HOOK-UP CORDS: Required Lower Cord Sold Separately! You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system. (you may back up to the previous headset page to purchase the necessary lower cord) Hook-up cord # HCPB to be used with: 1980 and later Honda® and J&M 5-pin audio systems Hook-up cord # HCPH to be used with: 2006 and later Harley® 7-pin audio systems Hook-up cord # HCPJM to be used with: the J&M JMCB2003 6-pin audio system Hook-up cord or with J&M portable Integratr® IV and other J&M 6-pin audio systems Hook-up cord # HCPHD to be used with: 1998-Up Harley® 7-pin audio systems Hook-up cord # HCPC to be used with: 1983 and later Yamaha®, Kawasaki® and Suzuki® 5-pin audio systems 1989-1997 Harley® 5-pin audio systems 1988-2000 Honda® GL-1500 with J&M passenger controller Hook-up cord # HCPTO to be used with: AUTOCOM EASI-7-Advance 7-pin audio system Hook-up cord # HCPEB to be used with: BAEHR Ultima SGS-09-03 5-pin audio system

Product Reviews

Click here to add your own product review

	11/9/2008 reviewer: Norm Rating: I bought 2 of these in July 2007 and have not had any issues with them. It was fairly easy to install without doing any cutting and once installed have not had any problems with them. Great sound and no interference from the engine when volume is up but when volume is all the way down it gets a little feed back. Communication between me and the wife is great with these. Overall I am very satisfied with these.
	11/4/2008 reviewer: Eric Rating: I too installed this into a HJC Symax II modular helmet. No cutting required. The total install took less than 20 minutes. The fit and sound quality are great. This unit comes with the newer slimmer speakers which made for a very comfortable fit.
	10/5/2008 reviewer: Greg Rating: Very easy to install in our HJC sy-max II flip up helmet. Sound quality is good but the Wings speakers sound better for music (more bass). These are the first headsets I have owned so I don't have anything to compare them to. But they work great.
	7/11/2008 reviewer: deanh Rating: Fitted great to my wifes HJC SY-MAX II flip front helmet. Speakers fit great in my Scorpion EXO 100 half helmet. Problem is the clamping system for the socket and mic sucks. My EXO 100 rim is too thick, cannot clamp the wires and mic at all. The inside of the plastic clamp can not go all the way down. Not sure about return policy as I had to cut cheap plastic bubble packaging,
	6/28/2008 reviewer: Canadian Wing Nut Rating: This is the second set of J&M headsets I have owned and OH MY GOD what an improvement!!! They sound fantastic, it's now a toss up for listening to music, speakers......Headset....HMMM. Let the wife decide!!

Read ALL reviews for this product