I bought the saddle bag and the trunk LED lighted moldings and installed them together. The instructions were better than most. Some drilling and wire splicing is required. It was a bit more demanding and time consuming than I anticipated.
These accessories are not cheap but it totally changes the overall appearance of the motorcycle and adds considerably to visibility. When not illuminated the moldings are chrome. Add power and the red LEDs come to life.
These are my favorite add-on. Be prepared for what was my most time consuming installation. Highly recommend.

Looks good, install was ok but not as easy as it should have been. Most Kuryakyn stuff uses harnesses, the saddlebag lights should also. The holes in the "Bosses" should be about 11/16" but most were far less. The first set cracked the boss when the screw was just beginning to engage. Wingstuff handled the return flawlessly - replacing without question. I drilled the bosses out on the second set before installing.

Overall it's OK. The light isn't as intense as I'd like it to be. The array's push in way to easy. If you are going to buy this, and if it isn't against the warranty I'd try to superglue or some how otherwise adhere the lights into the clips of the moulding itself. Overall fit and finish was 8 out of 10. The saddle bags were much more difficult to install than the trunk. Maybe some kind of pnp harness? I don't think it would be that hard.

the trunk kit looks GREAT !!! well worth the price. easy to install, the directions were right on the MONEY !! this is so what my bike needed !! thanks wingstuff

The trunk kit looks AWESOME!!! I dont have saddle bags so I can't speak to them. The install was extremely simple. the only hitch was it took about 20 minutes to install the lights and about two hours to find the connector they want you to plug into.